Chip Box Tuning for. 2.2 D-4D 110 kW 150 HP. 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018. Increase in power by. Increase in torque by. 30 – 65 Nm. Fuel consumption reduced by. 10-15% depending on your car. 30-day right to return! The latest chip with the software for 2019/2020. More Power, usually better fuel economy by up to +15% max. Up to 25 – 35% more power. Up to 25 – 35% more torque. Fully Digital (microprocessor 2oMHz by ATMEL). Comes with original connectors. Fuel consumption reduced by 10-15% depending on your car. Car will better respond to the gas pedal. OBD2 VERSION 3.0 DESCRIPTION. The new OBD2 v3.0 Chip Box is our newest, most universal and sophisticated chip box available on the market. The OBD2 v 3.0 uses a fast and efficient 20 MHz ATMEL microprocessor with a build-in flash memory containing a 3D map called the ignition Map. After the installation, the OBD2 v 3.0 communicates with the car’s computer (ECU) through the OBD2 CAN BUS and adjusts appropriate parameters from the Flash memory. It does not change the original ECU map. To establish a proper communication between the Chip Box OBD2 v3.0 and the car’s ECU, it is crucial that the diagnostic port OBD2 in the car needs to be equipped with the Can-Bus which means at least 8 pins. Car brand and model Engine size, Engine power (PS/BHP/HP/KW) Year of manufacture. WHY IS OBD2 V3.0 CHIP BOX THE BEST CHOICE? Compare OBD2 to chiptuning and chip box device to choose the best solution for you. You can control the change. You can quickly remove it. You can install it in another car. You can install the device yourself. 3D map stored in flash memory. Fully digital (processor Atmel 2oMhz). Much cheaper than chiptuning. Installed in a driver cabin, without opening the hood. The change of the parameters from many sensors at the same time. Fast mounting and dismounting. Easy to attached and unattached when required. THE ONLY TUNING DEVICE ON THE MARKET MOUNTED WITHOUT OPENING THE HOOD! YOU INSTALL THE OBD2 CHIP TUNING BOX IN THE CABIN AREA. Connect the black 9 pin plug connector in to the OBD2 v3.0 device and secure it with the screws. Locate your OBD2 diagnostic port. Usually it can be found at the driver’s side under the steering wheel. If you are not able to locate it, you can check in the car’s manual. Connect the OBD2 v3.0 Chip Box’s 16 pin connector to the diagnostic port in the car. Make sure it’s firmly attached. Proper connection should be indicated by turning on the LED lights on the Chip box. The signaling of the LEDs may differ depending on the car brand, year of manufacture and ECU drivers type. Insert the key to the ignition and turn it to the ON/AAC position, but do not start the engine yet. Now press and hold the reset button for about 5 sec. It is located on the top of the circuit board. After releasing the button, please wait for about 30-60 sec so that the Chip box will establish a stable communication with the ECU. Start up the engine and enjoy driving. The OBD2 v3.0 chip box from that moment will start to adjust itself to your driving habits. It will take approximately 150 to 200 km to improve your car’s fuel economy and performance. Our company has been specializing in car tuning for many years. Our products are still widely appreciated for their quality and effectiveness. This offer is a guarantee of the highest quality and safety of your car. Your review is important to us! Our feedback card is a reflection of our company. This is the reason why your satisfaction is of the greaest significance to us. Our customer service is at your disposal. 8:00 – 16:00 CET. Chip Box Tuning ChipPower – WITH US EVERYTHING GAINS POWER More Power, usually better fuel economy by up to +15% Max. Average power increase 25% – 35%. Up to 26% more torque. Easier acceleration throughout the rev range, also in the higher gears. Eliminated flat spots nad turbo lag – thanks to this, car accelerates well in the lower rpm range. After dismounting, factory settings are restored. Does not cause excessive smoking. Quick, 5-10 minute installation. Plug & Drive – original plugs. The item “US Performance Chip OBD2 v3 for Toyota Avensis T27 2.2 D-4D 150 HP Power Diesel” is in sale since Monday, August 19, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Performance Chips”. The seller is “chippower5″ and is located in Legnica. This item can be shipped worldwide.

• Manufacturer Part Number: 240003808
• Brand: ChipPower
• Product Type: Performance, Chip Box, Powerbox, Chip Tuning
• Placement on vehicle: Driver’s cabin
• Warranty: 24 months
• Power Box for (Car Brand Model): Toyota Avensis T27
• Power Box for (Car Engine): 2.2 D-4D 110 kW 150 HP
• Power Box for (Car Year of manufacture): 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
• Fuel: Diesel
• Increase in power: by 25% – 35% HP
• Increase in torque: by 30 – 65 Nm
• Improved fuel economy: up to 15%
• Features: Increase in power, reduced fuel consumption
• Installation: 5-15 minutes